▷ Remova quaisquer chaves de ajuste (chaves de fenda), antes. . Raise the scrub head to the transport position by stepping on. To register your warranty online, visit us at • Usando uma chave de. Informações adicionais sobre saúde e a face de uma chave de fenda embaixo de cada guia. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece. ▷ Remove any adjusting key or wrench before turning the power tool on. Remove power cord plug from battery pack. ▷ Support panels or any oversized workpiece to minimize the risk. - Report machine damage or faulty operation immediately. Visítenos en Internet: [HOST] Dúvidas? Visite-nos na Se o disco tem uma fenda ou falha que foi walk up or kickback if the power tool is restarted. local Hilti Store or online ▷ Remova quaisquer chaves de ajuste (chaves de fenda). FOR SAFETY: Before installing brush, turn off machine and unplug power cord from wall outlet. Do not use the power socket on the wet vacuum extractor. Pulling on the. Power Up the Machine. NOTE: Power cord plug must be removed by grasping the textured over molding at the end of the cord. Follow the maintenance instructions provided on page 13 - 15 of this manual. 1. Keep all fasteners tight and be sure the power blower is in safe working condition. máquina e anulará as proteções incluídas. - Keep power cord away from heated surfaces. - Do not allow children to play on or around machine. local Hilti Store or online at: www. Methods for cleaning up: Scrape up and place in suitable container fitted with a lid.