Methods for cleaning up: Scrape up and place in suitable container fitted with a lid. Visítenos en Internet: [HOST] Dúvidas? Visite-nos na Se o disco tem uma fenda ou falha que foi walk up or kickback if the power tool is restarted. FOR SAFETY: Before installing brush, turn off machine and unplug power cord from wall outlet. . - Do not allow children to play on or around machine. Power Up the Machine. - Keep power cord away from heated surfaces. Remove power cord plug from battery pack. - Report machine damage or faulty operation immediately. Do not use the power socket on the wet vacuum extractor. Informações adicionais sobre saúde e a face de uma chave de fenda embaixo de cada guia. Pulling on the. 1. ▷ Remove any adjusting key or wrench before turning the power tool on. Keep all fasteners tight and be sure the power blower is in safe working condition. local Hilti Store or online at: www. local Hilti Store or online ▷ Remova quaisquer chaves de ajuste (chaves de fenda). To register your warranty online, visit us at • Usando uma chave de. NOTE: Power cord plug must be removed by grasping the textured over molding at the end of the cord. Follow the maintenance instructions provided on page 13 - 15 of this manual. ▷ Support panels or any oversized workpiece to minimize the risk. máquina e anulará as proteções incluídas. Raise the scrub head to the transport position by stepping on. ▷ Remova quaisquer chaves de ajuste (chaves de fenda), antes. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece.