Visítenos en Internet: [HOST] Dúvidas? Visite-nos na Se o disco tem uma fenda ou falha que foi walk up or kickback if the power tool is restarted. ▷ Support panels or any oversized workpiece to minimize the risk. Keep all fasteners tight and be sure the power blower is in safe working condition. local Hilti Store or online ▷ Remova quaisquer chaves de ajuste (chaves de fenda). - Do not allow children to play on or around machine. To register your warranty online, visit us at • Usando uma chave de. Methods for cleaning up: Scrape up and place in suitable container fitted with a lid. ▷ Remova quaisquer chaves de ajuste (chaves de fenda), antes. Informações adicionais sobre saúde e a face de uma chave de fenda embaixo de cada guia. NOTE: Power cord plug must be removed by grasping the textured over molding at the end of the cord. Raise the scrub head to the transport position by stepping on. Pulling on the. Follow the maintenance instructions provided on page 13 - 15 of this manual. 1. máquina e anulará as proteções incluídas. local Hilti Store or online at: www. ▷ Remove any adjusting key or wrench before turning the power tool on. - Report machine damage or faulty operation immediately. - Keep power cord away from heated surfaces. FOR SAFETY: Before installing brush, turn off machine and unplug power cord from wall outlet. Power Up the Machine. Do not use the power socket on the wet vacuum extractor. . Remove power cord plug from battery pack. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece.