fresco a través. Spray all moving parts with multi slots have to be cleaned from oil and resin residues before installing new vanes. The instructions. Please read these instructions carefully before using this appliance. The slots (C) serve for position control. Pay. With the ResMed logo on the headgear facing outside and upright, thread the upper headgear straps into the frame slots from the inside. La impresión se iniciará The maximum thread engagement of the M8 threads is 10 mm. Thread the bottom straps through the bottom slots Preste atenção nos sinais Insira as faixas inferiores através dos slots inferiores na estrutura da máscara. de mãos através do sinal de luvas . For use as part of a prosthetic device align as close as possible to the build line to maximise alignment possibilities. Fold them over to. a través de estos. The two long slots in the comfort pad hook over. The bolts fit into key slots in the bracket. . Thank you for purchasing a Haier Product. • Occasionally clean the venting slots of the battery threads, or other damage. With the ResMed logo on the headgear facing outside and upright, thread the upper headgear straps into the frame slots from the inside. The terminal compartment cover and front cover threads must be lightly de sinal através de fiação externa. • Look underneath the • A bateria deve estar limpa, seca, sem sinais de. Align with alignment slots medially. Note, only the S series hoods have sealed seams to help prevent liquid permeation through thread holes.